Contents
How do I create a sweep void in Revit?
1. Click Modify | Sweep tab Sweep panel, and select a profile from the Profile list.
2. On the Options Bar, use the X, Y, Angle, and Flip options to adjust the position of the profile.
3. Click Apply.
4. Select the path, and in a 3D view, zoom in to see the profile.
How do you create a wall sweep in Revit?
1. Select a wall sweep in a 3D or elevation view, or click Architecture tab Build panel Wall drop-down (Wall: Sweep).
2. On the Properties palette, click Edit Type, or click Modify | Place Sweep tab Properties panel Type Properties.
3. In the Type Properties dialog, for Profile, select the desired profile type.
4. Click OK.
How do you make a void family in Revit?
Open the Revit family with unattached voids and click Create tab Properties panel Family Category and Parameters. In the Family Category and Parameters dialog, select Cut With Voids when Loaded and click OK. Load the family into the project and place it.21 jan. 2021
How do you save a sweep profile in Revit?
1. Open the profile family in family editor, then save it as a new family.
2. on the properties palette the is a drop down where you define the usage of this profile, pull down the menu and select sweep then click apply.
3. save and load the new family into ur project.
How do you create a 3D sweep in Revit?
How do I create a profile in Revit 2020?
1. Click File tab New Family.
2. In the New Family – Select Template File dialog, select a profile template, and click Open.
3. If necessary, sketch reference planes for constraining the lines in the profile.
4. Click Create tab Detail panel (Line), and sketch the profile loop.
How do you make Wall sweeps and reveals?
How do you cut a sink hole in a countertop in Revit?
After adding a void to the sink family, you need to open Family Category and Parameter window and check the [Cut with Void when loaded] box. Upon placing the sink to top of the countertop, use Cut command on the Modify menu to cut the hole. You can also nest the sink to the countertop family as well.18 août 2016
How do you cut a hole in a slab in Revit?
1. Click By Face or Vertical. Where is it? Architecture tab Opening panel. Structure tab Opening panel.
2. If you chose By Face, select a face in the floor, ceiling, or roof. If you chose Vertical, select the entire element. Selected face for opening by face.
3. Click Finish Opening.
How do you split a generic model in Revit?
How do you make a sweep?
1. In the Family Editor, on the Create tab Forms panel, do one of the following. To create a solid sweep, click (Sweep).
2. Specify the sweep path:
3. On the Mode panel, click (Finish Edit Mode).
4. Load or sketch a profile.
5. On the Properties palette, specify the sweep properties.
6. On the Mode panel, click (Finish Edit Mode).
How do I edit a sweep profile in Revit?
To edit the existing profile, on the Sweep panel, click (Edit Profile), and use the tools on the Modify | Sweep > Edit Profile tab. On the Mode panel, click (Finish Edit Mode) to finish editing the profile and again to finish editing the sweep.21 jan. 2021
How do I use profiles in Revit?
1. Click File tab New Family.
2. In the New Family – Select Template File dialog, select a profile template, and click Open.
3. If necessary, sketch reference planes for constraining the lines in the profile.
4. Click Create tab Detail panel (Line), and sketch the profile loop.
How do you sweep in Revit 2019?
1. Click Modify | Sweep tab Sweep panel, verify
2. If the Go To View dialog displays, select the view where you want to sketch the profile, and click OK.
3. Sketch the profile.
4. Click Modify | Sweep Mode (Finish Edit Mode).
How do you create a spline in Revit?
Click Place Lines tab (or respective Place