Contents
How do I make the 3D view bigger in Revit?
As long as it is a camera view, select the view on the sheet, and in the modify tab, select “Size crop,” check the radio button “Scale” then change the width or height to suit.22 nov. 2012
How do you zoom in 3D in Revit?
1. Click. Click the Zoom tool on a wheel to zoom in on the current view by 25 percent.
2. SHIFT+click. Hold down the SHIFT key before you click the Zoom tool on a wheel to zoom out of the current view by 25 percent.
3. CTRL+click.
4. Click and drag.
5. CTRL+click and drag.
6. SHIFT+click and drag.
7. Mouse wheel.
How do you change the 3D view in Revit?
1. Open a 3D view.
2. On the Properties palette, under Extents, select the Section Box option.
3. Click OK.
4. Select the section box and use the drag controls to modify the extents, as necessary. The following image shows the section box selected with the blue arrow drag controls visible.
How do you crop a 3D view in Revit?
In the drawing area, select the crop region. Click Modify
How do you make the camera view bigger on sheets in Revit?
1. To change the scale of the view, select the crop boundary and go to Modify | Cameras > Size Crop:
2. In the Size Crop dialog, select the button for Scale (locked proportions).
3. The Scale (locked proportions) option maintains the aspect ratio and the field of view remains the same.
How do you increase perspective view in Revit?
Use Size Crop To Adjust Perspective View Size Use the Size Crop tool to change the size of a perspective view to place on a sheet. Select the crop boundary then click on the Size Crop tool. Use the Scale (locked proportions) to keep the same proportions. Change the values until you get the size you want.3 sept. 2020
How do you zoom in Revit 2020?
Click the Zoom tool and hold down the mouse button to adjust the magnification of the model by dragging up and down. CTRL+click and drag. When using the Full Navigation wheels or the mini View Object wheel, you can control the target point used by the Zoom tool.19 avr. 2021
How do you zoom in Revit?
To Run Command Select the element(s) in Results then: Right-click and select Zoom In, Zoom Out, or Zoom Extents.
How do you zoom in on Revit without a mouse?
SHIFT+click and drag. Hold down the Shift key and then click and drag a window around the area in which you want to zoom. Note: If you hold down the Ctrl key along with the Shift key, you can zoom in to an area of a model using a center-based window instead of one defined by opposite corners.9 avr. 2018
How do I select a section box in Revit?
Open a 3D view. On the Properties palette, under Extents, select the Section Box option. Click OK. Select the section box and use the drag controls to modify the extents, as necessary.8 mar. 2021
How do I change the camera view in Revit?
Click the small arrow near the 3D view, and click the camera button on the drop-down menu. Then you can define the camera by two clicks: the camera position and target position. After you define the camera, Revit will automatically open a new view. This view will show you what your camera sees.
How do you change view in Revit?
1. Open a plan view.
2. On the Properties palette, locate the View Range parameter, and click Edit. Alternatively, enter VR on the keyboard.
3. In the View Range dialog, modify view range properties as necessary.
4. Click Apply to view changes.
Where is the crop box in Revit?
If the view is not cropped, On the View Control Bar, click (Crop View). If the view is cropped, but the crop region is not visible, click (Show Crop Region) on the View Control Bar.19 avr. 2021
How do you clip a view in Revit?
1. In the Project Browser, select the plan view you want to cut by the back clip plane.
2. On the Properties palette, under Extents, find the Depth Clipping parameter.
3. Click the button in the value column.
4. In the Depth Clipping dialog, select an option and click OK.
How do you add crop boxes in Revit?
1. If the view is not cropped, On the View Control Bar, click (Crop View).
2. If the view is cropped, but the crop region is not visible, click (Show Crop Region) on the View Control Bar.
3. Resize the crop region as necessary by using the drag control or setting the size explicitly.