How to sweep a profile in revit?

How do I edit a sweep profile in Revit?

1. On the Modify | Sweep tab Sweep panel, click (Select Profile).

2. On the Sweep panel, use the tools that display to select a new sweep profile or change the sweep profile location.

3. To edit the existing profile, on the Sweep panel, click (Edit Profile), and use the tools on the Modify | Sweep > Edit Profile tab.

How do you create a wall sweep in Revit?

Click Architecture tab Build panel Wall drop-down (Wall: Sweep). In the Type Selector, select the desired type of wall sweep. Click Modify | Place Wall Sweep Placement panel, and select the orientation of the wall sweep: Horizontal or Vertical. Place the cursor over the wall to highlight the wall sweep location.22 juil. 2021

How do I create a new wall sweep profile?

How do I use profiles in Revit?

1. Click File tab New Family.

2. In the New Family – Select Template File dialog, select a profile template, and click Open.

3. If necessary, sketch reference planes for constraining the lines in the profile.

4. Click Create tab Detail panel (Line), and sketch the profile loop.

How do I create a sweep in Revit 2020?

How do you create a 3D sweep in Revit?

What is a sweep in a foundation wall?

Foundation walls and piers in small residential buildings are usually made of masonry. … Horizontal bulging in the masonry is known as sweeping.

How do you make a sweep?

1. In the Family Editor, on the Create tab Forms panel, do one of the following. To create a solid sweep, click (Sweep).

2. Specify the sweep path:

3. On the Mode panel, click (Finish Edit Mode).

4. Load or sketch a profile.

5. On the Properties palette, specify the sweep properties.

6. On the Mode panel, click (Finish Edit Mode).

How do you make wall sweeps and reveals?

How do I make a reveal profile?

How do I add a wall sweep profile in Revit?

1. Select a wall sweep in a 3D or elevation view, or click Architecture tab Build panel Wall drop-down (Wall: Sweep).

2. On the Properties palette, click Edit Type, or click Modify | Place Sweep tab Properties panel Type Properties.

3. In the Type Properties dialog, for Profile, select the desired profile type.

4. Click OK.

How do I edit my profile family in Revit?

1. Double-click an instance of the family in the drawing area.

2. Select an instance of the family in the drawing area, and click Modify tab Mode panel (Edit Family).

3. In the drawing area or the Project Browser (under Families), right-click the family, and click Edit. The family opens in the Family Editor.

How do you create a model in Revit?

Where is Family Editor in Revit?

Select an instance of the family in the drawing area, and click Modify | tab Mode panel (Edit Family). Double-click an instance of the family in the drawing area. Note: The double-click editing behavior is determined by the setting for the Family element type in the Double-click Options.22 juil. 2021

How do you create a spline in Revit?

Click Place Lines tab (or respective Place tab or Create tab) Draw panel (Spline), and place the cursor in the drawing area. Click to specify the start point for the spline. Move the cursor and click to specify the next control point on the spline. Repeat as necessary.22 juil. 2021