Contents
Where is reference plane in Revit?
1. On the ribbon, click (Reference Plane). Architecture tab Work Plane panel (Reference Plane) Structure tab Work Plane panel (Reference Plane)
2. To draw a line: On the Draw panel, click (Line).
3. To pick an existing line: On the Draw panel, click (Pick Lines).
What is a reference plane used for?
Reference Planes. A reference plane is a flat surface that is typically used for drawing 2D sketches in 3D space.
What is the difference between reference plane and reference line in Revit?
What is the difference between reference planes and reference lines? A Reference Plane is an infinite plane that servers as a guide for drawing lines and geometry. A Reference Line creates a line similar to a reference plane, but that has logical start and end points.Aug. 31, 2015
How do you name a reference plane in Revit?
1. In the drawing area, select a reference plane.
2. On the Properties palette, for Name, enter a name for the reference plane. Tip: Click directly on the text label for the reference plane and type a name for the reference plane.
What is reference plane in balancing?
When several masses revolve in different planes, they may be transferred to a reference plane and this reference plane is a plane passing through a point on the axis of rotation and perpendicular to it. … the forces in the reference plane must balance, i.e., the resultant force must be zero and 2.
How do I create a reference level in Revit family?
1. Open the section or elevation view to add levels to.
2. On the ribbon, click (Level). Architecture tab Datum panel (Level)
3. Place the cursor in the drawing area and click.
4. Draw level lines by moving the cursor horizontally.
5. Click when the level line is the correct length.
How many reference planes are normally used?
three
What are the different types of reference planes?
1. The ecliptic or invariable plane for planets, asteroids, comets, etc.
2. The equatorial plane of the orbited body for satellites with small semi-major axes.
What is reference line?
A reference line, also referred to as a base line, is a user-defined vertical or horizontal line in the graph. Use reference lines to compare, reference, or measure against the data values displayed in the graph. … Reference lines are available if the X or Y axis contains a metric.
Where is Family Editor in Revit?
Select an instance of the family in the drawing area, and click Modify |
What is reference plane in engineering drawing?
A reference plane is a plane in 3D space used as the workspace for drawing and the basis for other interactive actions. … The initial reference plane is the XY plane (or ground plane). The reference plane may be one of the three Cartesian planes (XY, YZ, ZX), or it may be a custom plane.
How do I delete a reference line in Revit?
1. Select a permanent dimension.
2. Right-click the blue control in the middle of a witness line, and click Delete Witness Line.
How do you add a reference plane on Etabs?
Why the balancing is required?
Balancing plays a very important part in machines. Balancing in machines helps to rotating bodies to avoid vibrations; vibration in machines can lead to failure. … Other than the force that is needed the system will rotate without the need for any additional external force or pressure to be applied.
What is the reason for dynamic balancing?
Dynamic balancing definition: “Dynamic balancing is a way of balancing machines by rotating parts quickly and measuring the imbalance using electronic equipment. The imbalance measured can then be corrected by adding or subtracting weight from the rotating parts until the vibration is reduced.”