Contents
How do I change the direction of a bend in Solidworks?
The stated Bend Direction in a SOLIDWORKS Sheet Metal drawing is based on the defined fixed face of the model. Editing the Flat Pattern feature, in the Flat-Pattern folder, will display the currently defined “Fixed face”. To change the Bend Direction, select a face that is on the other side of the material.
How do you change the color of a drawing in Solidworks?
Changing Paper Color Scroll down to Drawings > Paper Color and select it. Click edit to open the dialog box that lets you select the color. You can choose predefined colors, or create your own from the color plot and by entering the RGB information.
How do you bend a leader in SolidWorks?
Right-click a dimension extension line and select Display Options > Jog. Horizontally or vertically drag a point on the dimension extension line to create a bend.
How do you add bend notes in SolidWorks?
In any sheet metal part, right click on the flattened pattern and select ‘Insert bend notes. ‘ The flattened pattern includes all of the bend notes on the flattened view. This includes the bounding box in the 2D view for easy reference.
What is bend line?
Bend lines are reference points for calculating developed length and creating bend geometry. The following figure shows a typical bend line. Bend line. Fixed geometry. In the following figures, the material is bent on the other side of the bend line ( ).
Why are my dimensions GREY in Solidworks?
SolidWorks has many default colors for different types of dimensions. On drawings, the two main types of dimensions are inserted (driving) and non inserted (driven). … When this mode is turned on, the user gets their colors right for other lines, but dimensions appear as both black and grey.
How do you show colors in Solidworks drawing?
To show model colors, click Tools > Options > Document Properties > Detailing. Select Use model color for HLR/HLV in drawings. Search ‘Show Model Colors in Drawings’ in the SOLIDWORKS Knowledge Base.
How do you draw a phantom line in SolidWorks?
First go to sketch, draw your line(s). Now right click in the grey part of the Command Manager and add the “Line Format” toolbar. Pick the line(s) you would like to make Phantom. Click the “Line Styles” Icon in the Line Format Toolbar and choose phantom.
What are leader lines solidworks?
Video: What’s New in SOLIDWORKS Electrical 2020 – Leader Lines. You can create leader lines with blocks and notes in 2D panel layouts and harness drawings. To create a leader line, on the Draw tab, under Annotation, click Block leader or Text leader .
How do I remove a bend note in Solidworks?
You cannot individually delete bend notes, but you can right-click the bend note, and select Hide.
How do you show a bend note?
Simply right click on the Flat Pattern feature in the Feature Manager Tree and select “Insert Bend Notes”. There will be a notification about the derived configuration: Clicking OK will show this: The derived configuration is the same as when a drawing view is created.
What is bend allowance formula?
This bend allowance formula is used to determine the flat pattern length when a bend is dimensioned from 1) the center of the radius, 2) a tangent point of the radius (B) or 3) the outside tangent point of the radius on an acute angle bend (C).
How do you find the minimum bend radius?
Minimum Bend Radius Calculation Example Answer: SHD-GC is a shielded mining cable. According to Table 1, the minimum bend radius is found to be six times the cable’s overall diameter. The overall diameter of the cable is given as 2.08 inches in the product catalog. Multiplying 2.08 inches by six, we get 12.48 inches.
How do you calculate bend radius?
If you drew your arc from the inside of your bend, add 1/2 the tube outer diameter to get your true center-line radius. If you drew your arc from the outside (top) of your bend, subtract 1/2 of the tube outer diameter to get your true center-line radius.
How do you find an Angle in Solidworks?
Measures distance, angle, radius, and size of and between lines, points, surfaces, and planes in sketches, 3D models, assemblies, or drawings. To open the Measure dialog box: Click Measure (Tools toolbar) or Tools > Evaluate > Measure. When you select a vertex or sketch point, the x, y, and z coordinates are displayed.
