Contents
Can you scale an entire assembly in SOLIDWORKS?
To scale an entire SOLIDWORKS assembly, it is possible to scale each part independently, however this could be extremely tedious for an assembly with a large number of components. Alternatively, you can save the assembly as a multi-body part and scale this part in a single step.
How do I scale a step file in SOLIDWORKS?
A 3D Solid Body can be scaled up or down using the SOLIDWORKS Scale feature. In this blog article other than introducing the Scale feature, a few scaling scenarios are also reviewed. The Scale Feature could be can under the Insert menu > Features > Scale or Insert menu > Molds > Scale.
How do you find the midpoint of a line in Solidworks?
Add a midpoint relation between the point and the horizontal line: click on the point, shift-click on the horizontal line, and select “Midpoint”.
Where is the modify features pane in Arcgis?
Change a segment To convert a segment’s geometry to a straight segment, an arc, or Bezier curve, right-click the segment and click Change Segment. On the Edit tab, turn off topology, choose your snapping preferences, and show the Modify Features pane.
Why can’t I extrude cut in Solidworks?
Most times it’s a tiny tiny gap in the shape that won’t let you cut since the profile is not complete. Another option is to just try cut extrude as a “thin feature” though this will not give you the result you want you should be able to see if any gaps exist.
How do you cut a rectangle in Solidworks?
Open a sketch on a face or plane, and sketch a profile of the cut. The profile can contain more than one closed contour. Click Extruded Cut or Revolved Cut (Features toolbar), or click Insert > Assembly Feature > Cut , then Extrude or Revolve. Set the options as needed in the Cut-Extrude or Cut-Revolve PropertyManager.
How do you extrude a rectangle in Solidworks?
Click Extrude (2D to 3D toolbar), or click Tools > Sketch Tools > 2D to 3D > Extrude, and click in the graphics area to establish the direction of the extrusion. The Base-Extrude PropertyManager appears.
How do I make parts smaller in Solidworks assembly?
Access the Scale tool (Insert, Features, Scale). Select all of the solid bodies in the part to be scaled. Choose the Scale Factor and other options as desired (for best results with a multi-body part, scale about the Origin). Click OK, as shown in the figure below.
How do I change the size of assembly in Solidworks?
To change a dimension: Double-click a dimension. The Modify dialog box appears. Change the dimension value with the arrows, thumbwheel , mouse wheel, or by typing in the dimension box.
How do I scale a DXF in Solidworks?
To specify the sheet scale, select Enable scale and choose a scale or User Defined. For User Defined, type a scale in the format 1:1 or 1/1. Scale output 1:1 in Task Scheduler differs from Scale output 1:1 in SOLIDWORKS. SOLIDWORKS lists only scales found in the current sheets.
Do STEP files have units?
The model is the proper size after import but the unit for the file defaults to millimeters. I can see internally the units used in the exported STEP file always appear to be meters, regardless of the workspace units used. NX only supports inch and millimeter units and the units are file specific.
Can you scale down an STL file?
To scale the scene you need to set one desired size for X, Y or Z in the tool options flyout. There’s no option to put in some scaling percentage or factor, so you’ll need to calculate the length of one dimension externaly.
Can you dimension to a centerline?
4. Dimensions should be given to finished surfaces or between important center lines (not to rough surfaces) wherever possible.
What does a centerline do in Solidworks?
Centerlines are annotations that mark circle centers and describe the geometry size on drawings. You can insert centerlines into drawing views automatically or manually. The SOLIDWORKS software avoids duplicate centerlines. If you dimension to a centerline, the extension lines are shortened automatically.
How do I center an origin in Solidworks?
Click Tools > Sketch Tools > Align > Align Grid/Origin. In the Align Grid/Origin PropertyManager, under Selections: To change only the sketch origin: Select a vertex or point for Sketch Origin Location .
