Contents
How do you make a parallel plane in Solidworks?
Right-click a face in the graphics area and click Create a Plane Parallel to Screen. The software adds an On Plane or On Surface 3D sketch point where you right-clicked and positions a reference plane parallel to the screen at that point. The sketch point may move if the surface moves.
When you select multiple edges to chamfer a flag is displayed?
True or False: A Chamfer can be applied to an edge, face, or vertex. When you select multiple edges to Chamfer, a flag is displayed on each edge and each one can be given individual Chamfer dimensions.
How many entities can you choose to mate with an angle mate?
Click Mate (Assembly toolbar) or Insert > Mate. In the Mate PropertyManager, for Entities to Mate , select two entities in the graphics area or the flyout FeatureManager design tree. Under Standard Mates, click Angle and set the dimension.
Why isn’t my sketch defined solidworks?
In this tech tip we’ll answer the common question: Why is my SOLIDWORKS Sketch Pattern Under Defined? The reason is because the sketch instances can rotate. You could previously Fully Define the instances by adding a Horizontal or Vertical relation on one of the construction lines tied to the instances.
How many types of work points are there?
Essentially, there are three types of points: Smooth Point. Straight Point. Corner Point.
Can you select a planar face as the reference plane for mirroring a feature?
You can select a planar face as a reference plane for mirroring a feature. Rectangular patterns must be created in just one direction. When using the Hole feature you can only create one type of hole at a time.
What type of arc can be transitioned to directly from sketching a line?
You can transition from sketching a line to sketching a tangent arc without selecting the Tangent Arc tool by autotransitioning .
Can you only select one face at a time when creating a shell feature?
You can only select one face at a time when creating a Shell Feature.
Can we apply the fixed angle mate between two curves?
You can control component motion in an animation by mating the component to a single entity curve, using coincident mates, or to a multiple entity curve, using path mates. You can also use a curve to define camera-based walk-through animations.
How do you know if your sketch is fully defined solidworks?
FULLY DEFINED SKETCH The sketch is fully defined if the lines on the sketch are all black. This means that there can be no unexpected changes within the model due to all the geometry of the sketch being fully defined.
Is AutoCAD the same as Solidworks?
In the computer-aided design world, you may hear people comparing SolidWorks and AutoCAD. … Yet, SolidWorks concentrates on “building up” your 3D models, while AutoCAD is the standard for 2D drafting. Each can do both, but there are nuances in their performances that clearly demonstrate their strengths.
How do you create a 2D sketch in Inventor?
In the Sketch Menu, click Start 2D sketch, then select the very bottom surface of your L bracket.
What are the two types of points?
Non-collinear points: These points, like points X, Y, and Z in the above figure, don’t all lie on the same line. Coplanar points: A group of points that lie in the same plane are coplanar. Any two or three points are always coplanar. Four or more points might or might not be coplanar.
What is a work point?
A work point is an independent entity whose location is defined in space. Work points may be placed or projected onto part faces, linear edges, or onto an arc or circle. Work points can be constrained to the center points of arcs, circles, and ellipses.
How many work planes are present in every user coordinate system?
UCS (user coordinate system) is a collection of work features (three workplanes, three axes, and a center point).