Contents
How do I create a plane at an angle to another plane?
The trick is simple: select a plane as the first reference and then select the multiple plane option BEFORE you pick the axis. Then select the angle option and type in 10 degrees and 36 in the ‘Number of planes to create’. This creates all 36 instantly!
How do you create an offset plane in Solidworks?
Click . You can also Ctrl + drag an existing plane to create a new plane that is offset from the existing plane. To change the names for construction planes in the current document, click-pause-click the plane’s name in the FeatureManager design tree and type a new name.
How do you offset a plane?
To create an Offset Plane, select a planar face or plane that you want to offset from and specify the offset distance. Select the Flip offset button if you need the plane to be created in the opposite direction.
How many types of work points are there?
Essentially, there are three types of points: Smooth Point. Straight Point. Corner Point.
What does zero thickness mean in Solidworks?
Zero-thickness geometry (also known as non-manifold geometry) exists when edges or vertices in a solid model do not properly connect with adjacent geometry. … SOLIDWORKS does not allow zero thickness geometry because it can lead to mathematical problems and downstream errors in the model.
How do you make a parallel plane in Solidworks?
Right-click a face in the graphics area and click Create a Plane Parallel to Screen. The software adds an On Plane or On Surface 3D sketch point where you right-clicked and positions a reference plane parallel to the screen at that point.
How do you cut in SolidWorks?
Click Cut With Surface on the Features toolbar, or click Insert > Cut > With Surface. In the PropertyManager, under Surface Cut Parameters, select the surface or plane to use to cut the solid bodies. Examine the preview. If necessary, click Flip cut to reverse the direction of the cut.
How many entities can you choose to mate with an angle mate?
Click Mate (Assembly toolbar) or Insert > Mate. In the Mate PropertyManager, for Entities to Mate , select two entities in the graphics area or the flyout FeatureManager design tree. Under Standard Mates, click Angle and set the dimension.
What is Hole Wizard and how it is used?
Hole Wizard is a tool inside SOLIDWORKS that allows you to quickly create holes within a part or assembly without the need of drawing or using multiple features. The Hole Wizard is made up of two tabs, the first: Type, covers the creation of the hole.
What are the two types of points?
Non-collinear points: These points, like points X, Y, and Z in the above figure, don’t all lie on the same line. Coplanar points: A group of points that lie in the same plane are coplanar. Any two or three points are always coplanar. Four or more points might or might not be coplanar.
What is a work point?
A work point is an independent entity whose location is defined in space. Work points may be placed or projected onto part faces, linear edges, or onto an arc or circle. Work points can be constrained to the center points of arcs, circles, and ellipses.
How many work planes are present in every user coordinate system?
UCS (user coordinate system) is a collection of work features (three workplanes, three axes, and a center point).
How do you use interference detection in Solidworks?
Interference Detection PropertyManager. You can select components to check and set options for types of interferences to find, and then calculate results. To open this PropertyManager: Click Interference Detection (Assembly toolbar) or Tools > Evaluate > Interference Detection.
Where is the FeatureManager design tree in Solidworks?
The FeatureManager design tree on the left side of the SOLIDWORKS window provides an outline view of the active part, assembly, or drawing. This makes it easy to see how the model or assembly was constructed or to examine the various sheets and views in a drawing.
Can you move the origin in Solidworks?
You can change the origin location and orientation in blocks. To change the origin location or orientation: Create blocks from several sketch entities. … Click Tools > Sketch Tools > Align > Align Grid/Origin.
