Contents
How do you close a curve in Solidworks?
If you want to close the curve, select the Closed curve check box. icon appears next to the curve name in the FeatureManager design tree.
How does SolidWorks calculate total length?
TOTAL LENGTH sums up the lengths of all cut list members that have the same standard, type, material, and size. The SOLIDWORKS software traverses all structural member cut list folders to calculate the total length. The TOTAL LENGTH property uses the same units and precision as the current document property settings.
How do you draw a hollow cylinder?
Sketch a circle, with a diameter of 56 mm, on top of the cylinder. This circle will become the sides of the hollow cylinder. Select the top of the cylinder as the plane you want to sketch on. Position the cursor over the center point of the top face to use it as the origin of the sketch.
What is socket pipe?
A socket is a fitting that simply goes over the end of a pipe. A 1″ socket end will fit on a 1″ pipe. These are extremely common. Many PVC couplings have socketed ends. A commonly used abbreviation for “socket” is “soc.”
How do I extract a surface in Solidworks?
To manually extract surfaces, select a sub-mesh, then select a surface type under Face Settings. When you extract surfaces, you might see salient sub-meshes (arrows), which are transitions between primary mesh regions.
Can you extrude a curve?
Select the edges/or faces you want to extrude and the curve you want to extrude along. Select Edit Mesh > Extrude > . Turn on either the Selected or Generated options. Click Extrude.
Why can’t I extrude cut in Solidworks?
Most times it’s a tiny tiny gap in the shape that won’t let you cut since the profile is not complete. Another option is to just try cut extrude as a “thin feature” though this will not give you the result you want you should be able to see if any gaps exist.
What does split line do in Solidworks?
tool projects an entity (sketch, solid, surface, face, plane, or surface spline) to surfaces, or curved or planar faces. It divides a selected face into multiple separate faces.
Can open sketch be extruded in Solidworks?
To extrude in both directions from the sketch plane in the PropertyManager, under Direction 1, select Through All – Both Directions. … To extrude as a thin feature, set the PropertyManager options in Thin Feature.
How do I select all dimensions in a Solidworks drawing?
To select everything in the graphics area: Click Edit > Select All, or press Ctrl+A. To limit the selection to specific entities in a part, pre-select one or more entities in the graphics area. For example, pre-select an edge and a vertex to limit the selection to all edges and vertices.
How do you stretch a body in Solidworks?
In the PropertyManager, under Entities to Stretch, select sketch entities for Sketch item or annotations. and then click on the sketch to set a base point. Drag to stretch the sketch entities. When you release, the entities stretch to that point and the PropertyManager closes.
Can you bend parts in Solidworks?
The sheet metal features appear in the FeatureManager design tree. To bend the sheet metal part, sketch lines on the part as shown. , or Insert > Sheet Metal > Sketched Bend . The part bends at the sketched lines.
How do you find the tangent plane to a surface?
When you click on a non planar face using the reference geometry>plane option, you can create a tangent plane. This tangent plane will be placed arbitrarily until a second reference is selected. By using a sketch point, these planes can be easily positioned in the desired orientation.
How do I look like a cylinder?
A cylinder has two flat ends in the shape of circles. These two faces are connected by a curved face that looks like a tube. If you make a flat net for a cylinder, it looks like a rectangle with a circle attached at each end.
What is a 90 degree elbow?
A 90 degree elbow is also called a “90 bend” or “90 ell”. It is a fitting which is bent in such a way to produce 90 degree change in the direction of flow in the pipe. It used to change the direction in piping and is also sometimes called a “quarter bend”.
