Contents
How do you cut a shape in SolidWorks?
Click Cut With Surface on the Features toolbar, or click Insert > Cut > With Surface. In the PropertyManager, under Surface Cut Parameters, select the surface or plane to use to cut the solid bodies. Examine the preview. If necessary, click Flip cut to reverse the direction of the cut.
How do you use revolve cut in SolidWorks?
Open a sketch on a face or plane, and sketch a profile of the cut. The profile can contain more than one closed contour. Click Extruded Cut or Revolved Cut (Features toolbar), or click Insert > Assembly Feature > Cut , then Extrude or Revolve. Set the options as needed in the Extrude or Revolve PropertyManager.
Can we extrude the sketch in both direction yes or no?
To extrude in both directions from the sketch plane in the PropertyManager, under Direction 1, select Through All – Both Directions. To extrude as a thin feature, set the PropertyManager options in Thin Feature.
What is revolved cut in SolidWorks?
Revolved Cuts There are many powerful cutting tools within SolidWorks besides the basic extrude cut tool. The revolved cut tool allows you to cut a profile around an axis creating complex geometry in a single feature. To set up a revolved cut it is very similar to any other feature, you start with a sketch.
How do you make a half dome in SolidWorks?
To create a dome: Click Dome on the Features toolbar, or click Insert > Features > Dome. Select one or more planar or non-planar faces. Set a value for the distance by which the dome expands.
What is swept boss base in SolidWorks?
What is Swept Boss or Base? Solidworks Swept boss is one of the useful features which help to sweeps a closed profile through an open or closed path.
How do you use the Hole Wizard in SolidWorks?
You can use the Hole Wizard to create customized holes of various types. To create hole wizard holes, create a part and select a surface, click Hole Wizard (Features toolbar) or Insert > Features > Hole > Wizard, set the PropertyManager options, and click .
Can we exclude the sketch in both directions?
Yes, using extruded direction selection in the box under the end condition drop down.
Can you extrude an open sketch in Solidworks?
Click Extrude (2D to 3D toolbar), or click Tools > Sketch Tools > 2D to 3D > Extrude, and click in the graphics area to establish the direction of the extrusion. The Base-Extrude PropertyManager appears.
Can you extrude an open sketch?
Yes is Possible to Extrude!, but you have to be in the Patch Mode, and then use the Extrude from the Create sub-menu.
How do you make a revolve cut?
To Create a Revolved Cut. The sketched section for a revolved cut must be closed. A revolved feature must contain an axis of revolution. Create an axis of revolution either by sketching a centerline with the revolved section, or by selecting existing linear geometry.
How do you hide tangent edges in SolidWorks?
Other options for tangent edge display are in the Hide/Show Edges PropertyManager. You can set the color of tangent edges in Tools > Options > System Options > Colors . In Color scheme settings, select Drawings > Model Tangent Edges and set the color.
What is the use of section view in design in SolidWorks?
In a section view in a part or assembly document, the model is displayed as if cut by planes and faces that you specify, to show the internal construction of the model. You can: Select bodies or components to include in or exclude from section views.
What feature would you use to draw a cone in a 3D modeling software?
Creating a cone In SketchUp, you can create a cone by resizing a cylinder face or by extruding a triangle along a circular path with the Follow Me tool.
Can you split a surface in Solidworks?
You can split surfaces with the Split tool. You can also split a combination of surfaces and solid bodies. To split a surface: Open install_dir sampleswhatsnewpartssplit.
