Contents
Why can’t I extrude cut in Solidworks?
Most times it’s a tiny tiny gap in the shape that won’t let you cut since the profile is not complete. Another option is to just try cut extrude as a “thin feature” though this will not give you the result you want you should be able to see if any gaps exist.
Can we extrude the sketch in both direction yes or no?
To extrude in both directions from the sketch plane in the PropertyManager, under Direction 1, select Through All – Both Directions. To extrude as a thin feature, set the PropertyManager options in Thin Feature.
Which tool would you use to cut a hole through the object in Solidworks?
Hole Wizard is a tool inside SOLIDWORKS that allows you to quickly create holes within a part or assembly without the need of drawing or using multiple features.
Where is the cavity tool in SolidWorks?
Click Cavity on the Mold Tools toolbar, or click Insert > Mold > Cavity.
What does a cutting plane line look like?
How cutting plane lines look. Cutting plane lines are thick lines that run through the center of the object that the interior wants to provide an interior view of. Two perpendicular lines with arrows showing in which direction the interior of the object should be viewed are drawn at the end of the line.
What is intersect in SolidWorks?
You can intersect solids, surfaces, or planes to modify existing geometry, or to create new geometry with the Intersect tool. You can also merge solids that you define with the Intersect tool, or cap some surfaces to define closed volumes. …
What does the split line feature do in Solidworks?
tool projects an entity (sketch, solid, surface, face, plane, or surface spline) to surfaces, or curved or planar faces. It divides a selected face into multiple separate faces.
Why is extrude cut greyed out?
It is greyed out because, as you have described it, you have bodies and not surfaces. TL;DR (more info below): You need to convert the solid body to a surface to use the Trim Surface. Or you need to use something like an Extruded Cut if you are only working with bodies. Or you need to use surfaces from the beginning.
Can we exclude the sketch in both direction?
Yes, using extruded direction selection in the box under the end condition drop down.
How do you extrude a boss in Solidworks?
You can also go to the toolbar and click Insert -> Boss/Base -> Extrude to pull up the Boss-Extrude Feature menu as well. Once the Extrude menu appears on the left-hand side of your screen, it will prompt you to select a plane or sketch that will be used to create a 3D model from.
Which option is used to extrude the sketch that passes through all surfaces?
Select an existing sketch and then click Model > Extrude. This method is referred to as object-action. Select a datum plane or planar surface to use as the sketching plane and then click Model > Extrude.
What is the difference between tapped hole and bottoming tapped hole?
the only difference what i could find is that the drill depth. Tapped hole have aproximately 2mm more drill depth when compared with bottoming tapped holes.
Why is cavity grayed out in Solidworks?
Do you have at least two solid bodies? Cavity can’t do anything (and will be greyed out) if you have only a single (or no) solid body.
Can you trace a picture in Solidworks?
(Sketch toolbar) or click Tools > Sketch Tools > Sketch Picture. … Select a tool for Image Type. Select a tool for Selection tools, and create a border around the image you want to trace. Click Begin trace.
How do I trace a sketch?
Use the “properties” controls to scale and position the image on the sketch plane as required. Once positioned click the “next” arrow to begin tracing your image. With the colour trace tool selected, click on an area of the image you want to trace around, then push the begin trace button.