Contents
How do you evaluate an angle in SolidWorks?
Measures distance, angle, radius, and size of and between lines, points, surfaces, and planes in sketches, 3D models, assemblies, or drawings. To open the Measure dialog box: Click Measure (Tools toolbar) or Tools > Evaluate > Measure. When you select a vertex or sketch point, the x, y, and z coordinates are displayed.
How do I use the measure tool in SolidWorks?
To use the measure tool: Click Measure (Tools toolbar) or Tools > Evaluate > Measure. While the Measure dialog box is open, you can switch among different documents without closing the dialog box. If you activate a document that has items already selected, the measurement information updates automatically.
How do I draw a line under another line in SolidWorks?
1 Answer. Robert H. You should be able to right click on the multiple sketch area and choose the ‘select other’ icon, which will bring up a list of all select-able entities in line with your cursor. Pick the buried one out of this list.
Can you flip a sketch in Solidworks?
Use the left-mouse to move, the right-mouse to rotate with the cursor in the graphics area. Place the cursor over each of the end points or the center of the black origin to flip the sketch.
How do you rotate an object 90 degrees in Solidworks?
Click Rotate View (View toolbar) or View > Modify > Rotate then drag the pointer . Drag with the middle mouse button. Press the arrow keys. Hold down Shift to rotate in 90° increments.
Can you mirror a sketch in Solidworks?
Mirroring Sketch Entities as You Sketch Them (Sketch toolbar) or Tools > Sketch Tools > Dynamic Mirror . Symmetry symbols appear at both ends of the line or edge. Create the sketch entities that you want to mirror. The entities are mirrored as you sketch them.
How do you add an evaluate tab in Solidworks?
Go to the Evaluate Tab and choose Measure. On default, your selected tool looks like a roll meter and a ruler. The default option selected is called “Show XYZ dimensions“. SHOW XYZ DIMENSIONS: So we will start with this one first.
How do you rotate a part in Solidworks?
Using the PropertyManager to Rotate a Component Click Rotate Component (Assembly toolbar) or Tools > Component > Rotate. The Rotate Component PropertyManager appears, and the pointer changes to . Select one or more components in the graphics area. Select a component and drag in any direction.
Where is the measure tool in Solidworks?
To open the Measure dialog box: Click Measure (Tools toolbar) or Tools > Evaluate > Measure. When you select a vertex or sketch point, the x, y, and z coordinates appear. When the Measure tool is not active, commonly used measurements for selected entities appear in the status bar.
How do you extrude in Solidworks?
Click Convert to Extrusion (2D to 3D toolbar), or click Tools > Sketch Tools > 2D to 3D > Extrude, and click in the graphics area to establish the direction of the extrusion. The Base-Extrude PropertyManager appears. Edit the properties in the Base Extrude PropertyManager.
How do you toggle selection in Solidworks?
To toggle the display of the Selection Filter toolbar: Click Toggle Selection Filter Toolbar (Standard toolbar), or press F5. Turns selected filters on or off. You can also press F6.
Can you split a spline in Solidworks?
The SOLIDWORKS Split Line tool is used to project an entity (sketch, solid, surface, face, plane, or surface spline) onto other surfaces or curved/planar faces. You are also able to split faces on multiple bodies with one command.
Can you extrude a line in Solidworks?
Select the sketch entities required for the feature. It is not necessary to select a complete sketch. … Click Extrude (2D to 3D toolbar), or click Tools > Sketch Tools > 2D to 3D > Extrude, and click in the graphics area to establish the direction of the extrusion.
How do you create an offset plane in Solidworks?
Click . You can also Ctrl + drag an existing plane to create a new plane that is offset from the existing plane. To change the names for construction planes in the current document, click-pause-click the plane’s name in the FeatureManager design tree and type a new name.
How many types of work points are there?
Essentially, there are three types of points: Smooth Point. Straight Point. Corner Point.
