Contents
What is a sketch point used for in Solidworks?
Insert points into sketches and drawings. To create sketch points: Click Point (Sketch toolbar) or Tools > Sketch Entities > Point.
How do you find a coordinate system?
Right-click the layer name in the Table of Contents, select Properties > Source tab, and examine the extent of the data. If the coordinates are in decimal degrees, such as between longitude -180 and +180, and latitude -90 and +90, identify the Geographic Coordinate System (datum) used for the data.
How do you move a coordinate system in Creo?
Click the drag handle at the center of the coordinate system to rotate the coordinate system about each of the reference coordinate system’s axes. To change directions, point to the drag handle and then move the pointer toward one of the axes. As you move the cursor toward the axes, the drag handle changes direction.
How do I use collision detection in SolidWorks?
To detect collisions as you move or rotate components: Click Move Component or Rotate Component (Assembly toolbar). In the PropertyManager, under Options, select Collision Detection. If the component you are moving touches any other component in the assembly, the collision is detected.
Do shapefiles have a coordinate system?
A shapefile often doesn’t have any information that identifies which coordinate system was used to define its features. In this case, the Shape column’s Spatial Reference property will be Unknown or Assumed Geographic.
What are the two types of coordinates?
Types of Coordinate Systems – Cartesian & Polar Coordinate Systems.
Is WGS 84 a projection system?
The North American 1983 datum (NAD83) uses the Geodetic Reference System (GRS80) ellipsoid while the World Geodetic System of 1984 (WGS84) uses the WGS 84 ellipsoid. … For example, the “WGS84 projection” is a geographic one. A UTM projection is a projected one.
What is the difference between a projection and a coordinate system?
Geographic coordinate systems are based on a spheroid and utilize angular units (degrees). Projected coordinate systems are based on a plane (the spheroid projected onto a 2D surface) and utilize linear units (feet, meters, etc.).
How do you move a part in Solidworks?
To move components with the PropertyManager: Click Move Component (Assembly toolbar) or Tools > Component > Move. The Move Component PropertyManager appears, and the pointer changes to . Select one or more components in the graphics area.
How do I change the orientation of a drawing in Solidworks?
Click View Orientation (View toolbar). Click View > Modify > Orientation. Press the Space Bar. Right-click in a drawing sheet and select Zoom/Pan/Rotate > View Orientation.
Why is Y up in Solidworks?
By default, the “Y” direction has always been the up-direction views in SOLIDWORKS. … Bringing SOLIDWORKS models into CAM software can involve extra time and work rotating the geometry. Usually the default up direction in these software packages is the “Z” direction.
Can you rotate a part in Solidworks?
Using the PropertyManager to Rotate a Component Click Rotate Component (Assembly toolbar) or Tools > Component > Rotate. The Rotate Component PropertyManager appears, and the pointer changes to . Select one or more components in the graphics area. Select a component and drag in any direction.
How do you change isometric view in Solidworks?
Click on Ctrl+7 of your Isometric View Icon to see your redefined Isometric View. I hope this helps you become more efficient!
How do you stop collision in Solidworks?
Select Stop at collision to stop the motion of the component when it touches any other entity. The faces that touch the component you are moving are highlighted. The computer beeps when a collision is detected.
How do you read coordinates?
Latitude and longitude are broken into degrees, minutes, seconds and directions, starting with latitude. For instance, an area with coordinates marked 41° 56′ 54.3732” N, 87° 39′ 19.2024” W would be read as 41 degrees, 56 minutes, 54.3732 seconds north; 87 degrees, 39 minutes, 19.2024 seconds west.
