Contents
What is extrude command in Solidworks?
Using the SOLIDWORKS Surface Extrude feature, we can extrude the boundary edges of a face of a solid body or edges of a surface body in a customized direction. When we run the Extruded Surface command, two things can happen: Either a sketch is active or preselected or no sketches exists.
How do you remove extrude in Solidworks?
Select the end condition. Select a plane to define an extrude direction normal to the plane. To remove the faces defining the extrude from the model after extruding, click Delete original faces.
Click Extrude (2D to 3D toolbar), or click Tools > Sketch Tools > 2D to 3D > Extrude, and click in the graphics area to establish the direction of the extrusion.
Why can’t I extrude cut in Solidworks?
Most times it’s a tiny tiny gap in the shape that won’t let you cut since the profile is not complete. Another option is to just try cut extrude as a “thin feature” though this will not give you the result you want you should be able to see if any gaps exist.
Where is boss Extrude in Solidworks?
The Extruded Boss/Base feature can be found on the features tab in the Command Manager interface as shown in Figure 1. You can also go to the toolbar and click Insert -> Boss/Base -> Extrude to pull up the Boss-Extrude Feature menu as well.
Can you make a curved plane in Solidworks?
To project a curve: Click Project Curve on the Curves toolbar, or Insert > Curve > Projected. … Under Direction of Projection , select a plane, edge, sketch, or face as the direction of the projected curve. Under Projection Faces , select the cylindrical face on the model where you want to project the sketch.
How do I delete in Solidworks?
Click Delete (Standard toolbar), click Edit > Delete or press Delete. If you delete an item that has dependent features, the Confirm Delete dialog box provides you with basic and advanced options to remove one or more selected items.
Can we extrude the sketch in both direction in Ansys?
Yes, using extruded direction selection in the box under the end condition drop down.
How do you select multiple faces in Solidworks?
To select everything in the graphics area: Click Edit > Select All, or press Ctrl+A. To limit the selection to specific entities in a part, pre-select one or more entities in the graphics area. For example, pre-select an edge and a vertex to limit the selection to all edges and vertices.
How many entities can you choose to mate with an angle mate?
Click Mate (Assembly toolbar) or Insert > Mate. In the Mate PropertyManager, for Entities to Mate , select two entities in the graphics area or the flyout FeatureManager design tree. Under Standard Mates, click Angle and set the dimension.
How do you add a boss in Solidworks?
The mounting boss feature can be found under Insert> Fastening feature > Mounting Boss. The mounting boss command requires a face or 3D point on which to locate the geometry on. The procedure which I have found helpful is to select a face in the general position that you want the boss to go.
Why is extruded cut grayed out?
It is greyed out because, as you have described it, you have bodies and not surfaces. TL;DR (more info below): You need to convert the solid body to a surface to use the Trim Surface. Or you need to use something like an Extruded Cut if you are only working with bodies. Or you need to use surfaces from the beginning.
Can we extrude the sketch in both direction Yes No?
Set the PropertyManager options. To extrude in both directions from the sketch plane in the PropertyManager, under Direction 1, select Through All – Both Directions. To extrude as a thin feature, set the PropertyManager options in Thin Feature.
How do you extrude a boss in SolidWorks assembly?
Boss Extrude can be move by two methods. Select the Boss Extrude from feature tree. Right click on it and select edit sketch. Now, edit the sketch as per your requirement.
How do you delete a dimension in Solidworks?
To remove a dimension from a drawing: Select a dimension and press Delete. Be careful not to delete any dimension that has a reference, such as one used in a note. Search ‘Deleting Dimensions’ in the SOLIDWORKS Knowledge Base.
