Contents
How do you cut a shape in SolidWorks?
Click Cut With Surface on the Features toolbar, or click Insert > Cut > With Surface. In the PropertyManager, under Surface Cut Parameters, select the surface or plane to use to cut the solid bodies. Examine the preview. If necessary, click Flip cut to reverse the direction of the cut.
Why can’t I extrude cut in SolidWorks?
Most times it’s a tiny tiny gap in the shape that won’t let you cut since the profile is not complete. Another option is to just try cut extrude as a “thin feature” though this will not give you the result you want you should be able to see if any gaps exist.
How do you rotate a cut in Solidworks 2020?
Open a sketch on a face or plane, and sketch a profile of the cut. The profile can contain more than one closed contour. Click Extruded Cut or Revolved Cut (Features toolbar), or click Insert > Assembly Feature > Cut , then Extrude or Revolve. Set the options as needed in the Extrude or Revolve PropertyManager.
Why is extrude cut greyed out?
It is greyed out because, as you have described it, you have bodies and not surfaces. TL;DR (more info below): You need to convert the solid body to a surface to use the Trim Surface. Or you need to use something like an Extruded Cut if you are only working with bodies. Or you need to use surfaces from the beginning.
What is swept cut in Solidworks?
Solidworks swept cut is features tool, mainly used to cut a solid model or part by sweeping a completely closed profile along an open or closed path. To use swept cut, you should need a closed profile and open or closed path, which may be line, helix, and circle, rectangular or arc etc.
Can we extrude the sketch in both direction yes or no?
To extrude in both directions from the sketch plane in the PropertyManager, under Direction 1, select Through All – Both Directions. To extrude as a thin feature, set the PropertyManager options in Thin Feature.
What is the correct comparison between an extruded revolved lofted swept and extruded cut revolved cut lofted cut swept cut?
What is the correct comparison between an Extruded (Revolved, Lofted, Swept) and Extruded Cut (Revolved Cut, Lofted Cut, Swept Cut)? An extruded feature adds material; an extruded cut divides the feature into equal pieces.
Can you sweep a body in Solidworks?
Under the SOLIDWORKS Cut Sweep command, there is an option which allows you to select a solid body instead of a sketch as a profile to produce the cut. The following image shows two bodies and a helix which works as the path for the sweep command. Solid Body #2 represents the cutting tool.
Can we exclude the sketch in both direction?
Yes, using extruded direction selection in the box under the end condition drop down.
Can you Extrude an open sketch?
Yes is Possible to Extrude!, but you have to be in the Patch Mode, and then use the Extrude from the Create sub-menu.
Can you Extrude an open sketch in Solidworks?
Click Extrude (2D to 3D toolbar), or click Tools > Sketch Tools > 2D to 3D > Extrude, and click in the graphics area to establish the direction of the extrusion. The Base-Extrude PropertyManager appears.
What is the difference between one side and both sides in extrusion?
17) What is the difference between One Side and Both Sides in extrusion? One-side extrudes only one specified direction from the sketching plane. Both sides extrudes both sides of the sketching planes.
When extrude cutting what option must be selected to cut a set distance into a part?
Under the “Direction 1” header there is a drop-down list containing options for the distance you wish to cut. The “Direction 1” options are as follows: Blind: A specified distance. Through All: Through the entire part in one direction, normal to the sketch plane.
Where is the cavity tool in SolidWorks?
Click Cavity on the Mold Tools toolbar, or click Insert > Mold > Cavity.
What is boundary boss in SolidWorks?
You can specify sketch curves, edges, faces, or other sketch entities to control the shape of a boundary feature. When you select entities to define the boundary feature in two directions, you can select curves influence options that control how the selected entities influence the design.
