Contents
How do you show gaps in Solidworks?
To select a gap, click to the Knit Surface icon . To select multiple gaps, press CTRL before selecting gaps. The gap is located on the component. To zoom in on a gap, right-click a selected gap in the PropertyManager and click Zoom to Selection.
How do I fill small gaps in Solidworks?
To create a filled surface, click Filled Surface on the Surfaces toolbar, or click Insert > Surface > Fill, set the PropertyManager options, and click OK . Set the PropertyManager options based on the type of filled surface you want to create. This example of an imported surface has a gap along the front face.
How do I repair a sketch in Solidworks?
To open the Repair Sketch tool: Click Tools > Sketch Tools > Repair Sketch. Repair Sketch deletes these from the sketch.
How do I get rid of contours in Solidworks?
To extrude shaded sketch contours: In sketch mode, click Shaded Sketch Contours (Sketch Toolbar) or Tools > Sketch Settings > Shaded Sketch Contours. Use Shaded Sketch Contours to turn-off the tool.
How should the warning shown here be repaired?
How should the warning shown here be repaired? Select a new face or plane to replace the missing one.
Can open sketch be extruded in Solidworks?
To use an open profile sketch to extrude using existing model edges: Open a sketch on a model face. Sketch an open profile with endpoints that are coincident with model edges on the same face boundary. Click Tools > Sketch Tools > Close Sketch to Model.
Where is thin feature in Solidworks?
The ‘Thin Feature’ section in the property manager can specify which side of the open contour for the material thickness to reside and how thick the thin feature should be. Once it is created, its name in the feature manager will reflect that it is a thin feature.
How do you thicken a surface in Solidworks?
To thicken a surface: Click Thicken on the Features toolbar, or click Insert > Boss/Base > Thicken. Examine the preview, and select the side of the surface you want to thicken, as shown below. Enter the Thickness .
Which file contains all the drawing document in Solidworks?
slddrt – Sheet Format File. . slddrt file is the file containing the drawing sheet information – the geometry and notes that helpful to the drawing’s properties. This also contains the anchors for the BOM, Revision Table, etc.
What is rollback in Solidworks?
You can use the FeatureManager rollback bar or shortcut menu to temporarily roll back to an earlier state, to absorbed features, roll forward, roll to previous, or roll to the end of the FeatureManager design tree. You can add new features or edit existing features while the model is in the rolled-back state.
What special piece of sketch geometry is useful but not required for a revolve feature?
What special piece of sketch geometry is useful, but not required for a revolve feature? Centerline.
When you select multiple edges to chamfer a flag is displayed?
True or False: A Chamfer can be applied to an edge, face, or vertex. When you select multiple edges to Chamfer, a flag is displayed on each edge and each one can be given individual Chamfer dimensions.
Which choice is an example of a sketched feature?
Sketched features require the use of a sketch in order to be created, and include features such as Extruded Boss/Cut, Revolved Boss/Cut and many others. Applied features do not require a sketch, and are applied directly to existing geometry.
How do I make extruded cuts in Solidworks?
Open a sketch on a face or plane, and sketch a profile of the cut. The profile can contain more than one closed contour. Click Extruded Cut or Revolved Cut (Features toolbar), or click Insert > Assembly Feature > Cut , then Extrude or Revolve. Set the options as needed in the Cut-Extrude or Cut-Revolve PropertyManager.
Which end condition extruded boss?
The default end condition is “blind,” which means we will take our sketch and extrude it a set distance from the sketch plane. After that distance is met, extrusion will stop. So the condition for ending the extrusion is that it will proceed a set distance and then stop. Again, this is known as a “blind” end condition.
