Contents
Can’t fully define sketch in Solidworks?
In some sketches only certain relations and dimensions can fully define the sketch. Limiting your selection may prevent the sketch from being fully defined. In this sketch, no relations were allowed. It cannot be fully defined.
What sketch constraint can make 2 circles the same diameter?
The equal constraint causes selected circles and arcs to have the same radius and selected lines to have the same length. On the ribbon, click Sketch tab Constrain panel Equal . Click the first circle, arc, or line. Click a second curve of the same type to make the two curves equal size.
What is solidworks freeze bar?
The freeze bar controls the point at which a part’s FeatureManager design tree rebuilds. Features above the freeze bar are frozen – you cannot edit them, and they are excluded from rebuilds of the model. Freezing a portion of a model can be useful if you work with complex models with many features.
How do I freeze a bar in Solidworks?
To turn on the freeze bar, click Tools > Options > System Options > General and select Enable Freeze bar. To freeze features: Move the pointer over the freeze bar. The pointer changes to .
How do you tell if a SOLIDWORKS sketch is fully defined?
FULLY DEFINED SKETCH This means that there can be no unexpected changes within the model due to all the geometry of the sketch being fully defined. On more complex sketches with 100+ lines, looking on the bottom right corner the SolidWorks interface will help tell the user if the sketch is fully defined.
Why are my lines Blue SOLIDWORKS?
When attempting to fully define a sketch in SOLIDWORKS, users often struggle to find those final missing dimensions or geometric relations. … However, if a segment of a sketch appears blue, indicating the segment is under-defined, it can’t be moved.
How can we confirm that a sketch is fully defined SOLIDWORKS?
You can use the Fully Define Sketch PropertyManager to apply dimensions and relations calculated by SOLIDWORKS to automatically fully define the sketch. Click the Fully Define Sketch button from the Dimensions/Relations toolbar or pull down the Tools menu and pick Dimensions > Fully Define Sketch.
How do I fix a sketch in Solidworks?
To open the Repair Sketch tool: Click Tools > Sketch Tools > Repair Sketch. Repair Sketch deletes these from the sketch.
Which 3D tool requires two sketches one for the profile and one for the path?
The Sweep tool requires two unconsumed and visible sketches in order to create a swept feature. One of the sketches must contain the profile to be swept (profile sketch), while the other sketch must contain the curve along which the profile will be swept (path sketch). The path sketch could be a 2D sketch or 3D sketch.
What is constraint solidworks?
Define constraints to specify the conditions that your design must satisfy. The constraints can be driven global variables or sensors for mass properties, dimensions, and simulation data.
Can solidworks do 2D drawing?
Can you draw 2D in SOLIDWORKS? You can draw 2D in SOLIDWORKS, however, it should be reserved for annotations. Ideally, you should use your 3D models to create 2D drawings. SOLIDWORKS drawings comprise at least one view generated from either a part or assembly.
Is AutoCAD the same as Solidworks?
In the computer-aided design world, you may hear people comparing SolidWorks and AutoCAD. … Yet, SolidWorks concentrates on “building up” your 3D models, while AutoCAD is the standard for 2D drafting. Each can do both, but there are nuances in their performances that clearly demonstrate their strengths.
Why does solidworks keep freezing?
You will need to make sure that Solidworks is set to be using either the global setting (Auto-select: NVIDIA GPU) or High-performance NVIDIA processor. After checking the above settings, Solidworks RX diagnostics should show the correct graphics card and your Solidworks will stop crashing when placing a sketch.
What is rollback in Solidworks?
You can use the FeatureManager rollback bar or shortcut menu to temporarily roll back to an earlier state, to absorbed features, roll forward, roll to previous, or roll to the end of the FeatureManager design tree. You can add new features or edit existing features while the model is in the rolled-back state.
How many dimensions are required to fully define a rectangle?
A rectangle is defined as having two sets of parallel lines (4 lines total) creating 90 degree angles at each corner. This constraint in turns fully defines the sketch: therefore the rectangle can only have a length and a width (2 dimensions).
