Contents
Can we select non planar surface as sketch plane in Catia?
No, we cannot select a non-planar surface as sketch.
What is a counterbored hole?
A counterbore (symbol: ⌴) is a cylindrical flat-bottomed hole that enlarges another coaxial hole, or the tool used to create that feature. A counterbore hole is typically used when a fastener, such as a socket head cap screw, is required to sit flush with or below the level of a workpiece’s surface.
How do you properly drill a hole in metal?
Use a heavier, sharp punch to re-punch the smaller mark and make a dimple. Be careful here because sometimes a punch mark will work harden the metal and will actually be harder to drill than it should be. Use a small bit to drill a pilot hole.
Why can’t I extrude cut in SolidWorks?
Most times it’s a tiny tiny gap in the shape that won’t let you cut since the profile is not complete. Another option is to just try cut extrude as a “thin feature” though this will not give you the result you want you should be able to see if any gaps exist.
Is pattern is only used for creating holes in SolidWorks?
You can use sketch driven patterns for holes or other feature instances. Using X-Y coordinates, you can specify a feature pattern. Hole patterns using X-Y coordinates are a common application for table driven patterns. However, you can use other seed features, such as a boss, with table driven patterns.
Which is the tool used to exit from sketcher workbench to Part Design workbench?
Q4. Which is the tool used to exit from sketcher workbench to part design workbench? Ans: Exit sketcher.
What is the name of tool to exit from sketcher environment?
To exit the sketcher workbench, choose the Exit workbench button from the Workbench toolbar.
Can you mirror bodies?
Mirroring bodies can be used whether in a single or multi body part and allows you to select solid geometry instead of the features and faces in a body.
What is hole Wizard in Solidworks?
Hole Wizard is a tool inside SOLIDWORKS that allows you to quickly create holes within a part or assembly without the need of drawing or using multiple features. The Hole Wizard is made up of two tabs, the first: Type, covers the creation of the hole.
What is the purpose of a blind hole?
Blind holes and through holes A blind hole is a hole that is reamed, drilled, or milled to a specified depth without breaking through to the other side of the workpiece. A through hole is a hole that is made to go completely through the material of an object.
What is the difference between a countersink and a counterbore hole?
The key difference between countersink and counterbore screws are the size and shape of the holes, counterbore holes are wider and more square to allow for the addition of washers. … Countersinking creates a conical hole matching the angled shape on the underside of a flat-head screw.
Can I use wd40 for drilling metal?
WD-40 will work just fine as a cutting oil. … For drilling holes in steel that’s 1/8 in. or thicker, use cutting fluid or a multipurpose oil like 3-IN-ONE. Lubricating the bit reduces friction and heat buildup, which makes drilling easier and your bits last longer.
How can you make a hole in metal bigger without a drill?
To make a hole bigger without a drill, you need to get either sandpaper and a dowel, a hand file, or a jab saw. It’s helpful to draw the size of the circle needed first, then manually file the excess wood until the hole is the right size. Wipe away the dust and your project is ready to continue.
Can you drill through a live bullet?
It is extremely unsafe to drill into a live primer.
How do you drill an accurate dowel hole?
Use sharp brad point bits instead of twist bits (because you typically drill dowel holes on end or edge grain, which encourages twist bits to wander). Mount a stop collar to your bit to get consistent hole depths. (Drill 1⁄ 8 ” deeper than one-half the dowel length.)
