Contents
How do you do a Pierce relationship in SolidWorks?
To apply a pierce relation a line and a sketch point are required. Either use the “Add Relation” option or use the control key to select and highlight the two entities you are wanting to combine with a pierce relationship.
What is a pierce point?
The pierce point defines the location of the profile, relative to the sketch segment used to create the structural member. The default pierce point is the sketch origin in the profile library feature part. Any vertex or sketch point specified in the profile can also be used as a pierce point.
How do you join two points in SolidWorks?
(Routing Tools toolbar) or Tools > Routing > Routing Tools > Create Connection Point . To create a connection point on a cylindrical feature, select the flat face of the feature. You do not need to create a sketch point first. The Connection Point PropertyManager appears.
Where is Pierce in SolidWorks?
I will need to select two entities (you can do this by holding down the CTRL key). Let’s select the point and the curve shown below. After selecting them, you’ll be given some relationship options on the left side of the screen under Properties. Select Pierce.
How do you mate Concentric in SolidWorks?
Quick Mates Simply hold down Ctrl and select the two entities you wish to mate. The supported mate types are all standard mates (Concentric, Coincident, Equal, etc), as well as some advanced mates (Profile Center, Symmetric and Width) and some mechanical mates (Cam and Slot).
Why isn’t my sketch defined solidworks?
In this tech tip we’ll answer the common question: Why is my SOLIDWORKS Sketch Pattern Under Defined? The reason is because the sketch instances can rotate. You could previously Fully Define the instances by adding a Horizontal or Vertical relation on one of the construction lines tied to the instances.
When you start a new sketch with sketch types do you select from?
Getting Started. A sketch is almost always the first step in designing a new part. To begin, create a new part and select your desired template. Once the user interface is visible, click the Sketch tab of the CommandManager and select the Sketch icon on the left-hand side.
What is a coincident mate in SolidWorks?
A coincident mate, like the name sounds, is a mate between two features that you want to coincide with each other. Generally we use it for making two planes parallel and coincident.
What does Coradial mean?
Coradial. Two or more arcs. The items share the same centerpoint and radius. Perpendicular. Two lines.
What does a concentric mate do?
Coincident: Positions selected planes, edges, and faces on the same infinite plane. … Concentric: Places two cylindrical, spherical or conical faces of a part so that they share the same centerline. Lock: Keeps two components at the same position and orientation.
How many entities can you choose to mate with an angle mate?
Click Mate (Assembly toolbar) or Insert > Mate. In the Mate PropertyManager, for Entities to Mate , select two entities in the graphics area or the flyout FeatureManager design tree. Under Standard Mates, click Angle and set the dimension.
How do you tell if a solidworks sketch is fully defined?
FULLY DEFINED SKETCH This means that there can be no unexpected changes within the model due to all the geometry of the sketch being fully defined. On more complex sketches with 100+ lines, looking on the bottom right corner the SolidWorks interface will help tell the user if the sketch is fully defined.
How do I make a parallel sketch in Solidworks?
Right-click a face in the graphics area and click Create a Plane Parallel to Screen. The software adds an On Plane or On Surface 3D sketch point where you right-clicked and positions a reference plane parallel to the screen at that point. The sketch point may move if the surface moves.
What is constraint solidworks?
Define constraints to specify the conditions that your design must satisfy. The constraints can be driven global variables or sensors for mass properties, dimensions, and simulation data.
How do you add a relation in Solidworks 2020?
(Dimensions/Relations toolbar) or Tools > Relations > Add to create geometric relations (such as tangent or perpendicular) between sketch entities, or between sketch entities and planes, axes, edges, or vertices.
