Contents
How do you do reference geometry in Solidworks?
Left click insert → Reference Geometry to insert planes, axis, coordinate system, mate references, and points. Reference Geometry can also be found on the features toolbar. Left click on the pull down arrow and then left click on the desired tool.
Which three items are referred to as reference geometry in Solidworks?
Categories. Categories. Reference Geometry includes reference planes, axes, coordinate systems, and points.
How many entities can you choose to mate with an angle mate?
Click Mate (Assembly toolbar) or Insert > Mate. In the Mate PropertyManager, for Entities to Mate , select two entities in the graphics area or the flyout FeatureManager design tree. Under Standard Mates, click Angle and set the dimension.
How do you calculate the weight of a part in SolidWorks?
Select items (components or solid bodies) to be evaluated. If no component or solid body is selected, the mass properties for the entire assembly or part are reported. Click Mass Properties (Tools toolbar) or Tools > Evaluate > Mass Properties. The calculated mass properties appear in the dialog box.
How do I create a section property in SolidWorks?
Click Section Properties (Tools toolbar) or Tools > Evaluate > Section Properties. The results are displayed in the Section Properties dialog box.
How do you calculate the area of a projection?
The projected area calculation therefore uses the area formula for a circle: area equals pi times radius times radius, or A=πr2. If the diameter of the sphere is 20 feet, then the radius will be 20÷2=10 and the projected area will be A=π × 102≈3.14 × 100=314 square feet.
How do I view sections in Solidworks?
(View toolbar) or View > Display > Section View. Define a section view by selecting one, two, or three planes or planar faces.
What is reference geometry?
Reference geometry defines the shape or form of a surface or a solid. Reference geometry includes items such as planes, axes, coordinate systems, and points. You can use reference geometry in the creation of several kinds of features.
How many reference entities are required for inserting a plane?
To create a Coincident Reference Plane, you need to select 3 vertices to fully define the new plane. Once three vertices and the Coincident buttons are selected, the Fully Defined message will appear in green and you can choose the green check mark to create the plane coincident to all 3 selected vertices.
When you select multiple edges to chamfer a flag is displayed?
True or False: A Chamfer can be applied to an edge, face, or vertex. When you select multiple edges to Chamfer, a flag is displayed on each edge and each one can be given individual Chamfer dimensions.
Can we apply the fixed angle mate between two curves?
You can control component motion in an animation by mating the component to a single entity curve, using coincident mates, or to a multiple entity curve, using path mates. You can also use a curve to define camera-based walk-through animations.
How do I make extruded cuts in SolidWorks?
Open a sketch on a face or plane, and sketch a profile of the cut. The profile can contain more than one closed contour. Click Extruded Cut or Revolved Cut (Features toolbar), or click Insert > Assembly Feature > Cut , then Extrude or Revolve. Set the options as needed in the Cut-Extrude or Cut-Revolve PropertyManager.
How do you smooth a curve in Solidworks?
To access this tool you must be in an open sketch, and have the spline selected in the graphics area. Next, head to Tools > Spline Tools > Simplify Spline. In the dialog box you can either set a value for tolerance and click OK or click Smooth and watch SOLIDWORKS do its thing (always my preferred option).
Can you make a curved plane in Solidworks?
To project a curve: Click Project Curve on the Curves toolbar, or Insert > Curve > Projected. … Under Direction of Projection , select a plane, edge, sketch, or face as the direction of the projected curve. Under Projection Faces , select the cylindrical face on the model where you want to project the sketch.
How do you thicken a surface in Creo?
Enter the Thicken tool by clicking Model > Thicken. In order to enter the Thicken tool, you must have a surface feature or quilt selected. Only valid geometry can be selected before entering the Thicken tool.