Contents
How do you create a revolve in Solidworks?
To create a revolve feature: Create a sketch that contains one or more profiles and a centerline, line, or edge to use as the axis around which the feature revolves. Click one of the following revolve tools: Revolved Boss/Base (Features toolbar) or Insert > Boss/Base > Revolve.
What is use of revolve feature in Solidworks?
About the Revolve Feature. Revolve is a method of defining three-dimensional geometry by revolving a sketched section around a centerline. Use the Revolve tool to create a solid or surface feature, and to add or remove material. You can create the following revolve types: • Revolved protrusion—Solid, Thickened.
Where is axis of revolution in Solidworks?
Click Axis on the Reference Geometry toolbar, or click Insert > Reference Geometry > Axis. Select the axis type in the Axis PropertyManager, then select the required entities for that type. Verify that the items listed in Reference Entities correspond to your selections.
What is needed to revolve a feature?
About the Revolve Feature. A revolved section requires an axis of revolution that can be created either with the section or defined by selecting model geometry. Legacy revolved features that were defined using the Constant angle option are automatically converted to Variable.
What are the two components necessary for creating a revolve feature?
There are two ways to created revolved features: from a sketch profile or from a primitive. The primitive shape creation commands create full revolutions only. They do not create surfaces or partial revolutions.
What is use of revolve feature?
Revolves add or remove material by revolving one or more profiles around a centerline. You can create revolved boss/bases, revolved cuts, or revolved surfaces. The revolve feature can be a solid, a thin feature, or a surface.
How do you chamfer in SolidWorks?
To create a chamfer: Click Chamfer (Features toolbar) or Insert > Features > Chamfer. Under Chamfer Parameters, select an item and set parameters.
What is the use of guide curve in Loft feature?
A guide curve defines the path that the loft takes as it interpolates between the loft profiles. This parameter acts very similar to the “Path” sketch available when creating a Sweep feature in SolidWorks. This guide curve can be a single sketch or several different sketches can be used to define multiple guide curves.
What is revolved boss in Solidworks?
To create a revolve feature: Create a sketch that contains one or more profiles and a centerline, line, or edge to use as the axis around which the feature revolves. Click one of the following revolve tools: Revolved Boss/Base (Features toolbar) or Insert > Boss/Base > Revolve.
What is an example of revolve?
Revolve is defined as to think about something, or cause to move in a circle. An example of revolve is thinking about work while trying to go to sleep. An example of revolve is spinning a toy top. An example of revolve is a ballet dancer doing a pirouette.
What is revolve command?
The Revolve command in AutoCAD 3D is used to create a 3D solid or surface by sweeping the object through its axis at a predefined angle.
What is fillet and chamfer in Solidworks?
New in SOLIDWORKS 2019 are new features called the SOLIDWORKS Partial Fillet and Chamfer; where you are able to specify the length of fillet/chamfer on your model edges. This will give you freedom in choosing the start and end points of your fillet/chamfer on existing edges without worrying about splitting the edges.
What is the minimum number of profiles for a Loft feature?
Default (Available with three profiles minimum).
Can you loft to a point in SolidWorks?
You can create a loft to a point, even if the point is part of a sketch containing other sketch entities.
What is the minimum number of guide curves required to create a loft SolidWorks?
At minimum, loft function requires two closed-loop sketch. 4. Draw the “Guide curve” for the loft operation. This step is not mandatory, only if user requires the profile to follow defined path.
