Contents
How do I change the center point in Solidworks?
In a sketch, click Centerpoint Straight Slot (Sketch toolbar) or Tools > Sketch Entities > Centerpoint Straight Slot . Click to specify the center point for the slot. Move the pointer and then click to specify the length of the slot. Move the pointer and then click to specify the width of the slot.
What are sketch points?
Insert points into sketches and drawings. To create sketch points: Click Point (Sketch toolbar) or Tools > Sketch Entities > Point.
How do I edit a title block in Solidworks?
To edit the title block, the sheet properties, or add or delete a sheet, right click anywhere on the sheet in the design space and select the desired option. To edit the title block, once Edit Sheet Format has been selected, the title block can be edited.
How do I change the orientation of a drawing in Solidworks?
Click View Orientation (View toolbar). Click View > Modify > Orientation. Press the Space Bar. Right-click in a drawing sheet and select Zoom/Pan/Rotate > View Orientation.
How do you add a point?
Adding and Subtracting Decimals To add decimals, follow these steps: Write down the numbers, one under the other, with the decimal points lined up. Put in zeros so the numbers have the same length (see below for why that is OK) Then add, using column addition, remembering to put the decimal point in the answer.
What is a point center point used for?
An alternative way to increase power is to use center points. By adding just a few center points to your design, you can increase the probability of detecting significant X’s, and estimate the variability (or pure error, statistically speaking).
Which three items are referred to as reference geometry in SolidWorks?
Categories. Categories. Reference Geometry includes reference planes, axes, coordinate systems, and points.
How do you project geometry in SolidWorks?
To project a curve: Click Project Curve on the Curves toolbar, or Insert > Curve > Projected. Use this selection to project a sketched curve onto a model face. Under Sketch to Project , select the curve in the graphics area or from the flyout FeatureManager design tree.
How many entities can you choose to mate with an angle mate?
Click Mate (Assembly toolbar) or Insert > Mate. In the Mate PropertyManager, for Entities to Mate , select two entities in the graphics area or the flyout FeatureManager design tree. Under Standard Mates, click Angle and set the dimension.
How do you exploded view into drawing in Solidworks?
Right-click the drawing view and click Properties. In the Drawing View Properties dialog box, under Configuration information, select Show in exploded or model break state.
How do you autofill title blocks in Solidworks?
For the sheet title, you can link the sheet name note in the title block to the sheet name, then right-click on the sheet tab, choose “Rename”, enter the desired name, and then the title block note will update when you rebuild.
How do I show XYZ in Solidworks?
To turn the display of axes on or off: Click View > Hide/Show > Axes. Search ‘Turning the Display of Axes On or Off’ in the SOLIDWORKS Knowledge Base. SOLIDWORKS welcomes your feedback concerning the presentation, accuracy, and thoroughness of the documentation.
Where is the FeatureManager design tree in Solidworks?
The FeatureManager design tree on the left side of the SOLIDWORKS window provides an outline view of the active part, assembly, or drawing. This makes it easy to see how the model or assembly was constructed or to examine the various sheets and views in a drawing.
How do I change the orientation of an isometric view in Solidworks?
Click Tools > Customize and select or clear Use Large Tooltips to enable or disable the view previews. flyout button in the Orientation dialog box to select axonometric (isometric, dimetric, or trimetric) views and to set which type of axonometric view is displayed when you select a View Selector corner.
How do you align objects in blender?
You can use Align Objects available in the 3d view header under Object > Transform > Align Objects. This will bring up a panel in the toolshelf and you can choose the axis to align the selected objects on. You can also choose to align relative to and the mode to align by.
