Contents
How do I dissolve a sketch text in SolidWorks?
If you would prefer the Sketch text to not behave like a block, it can be broken down into its separate sketch entities by right clicking and choosing to “dissolve sketch text.” Dissolving the sketch text will no longer allow you to make changes to the text.
How do I center text in Solidworks?
After you sketch a centerline you can select it with the curve selection box. You can enter text in a box below the curve selection box. Your text will appear above the line. You can then select the center align option to center the text and click the green check to confirm the change.
How do I color text in Solidworks?
To set system colors: Click Options (Standard toolbar) or Tools > Options, and select Colors.
How do I reduce the size of a dimension in Solidworks?
To change a dimension: Double-click a dimension. The Modify dialog box appears. Change the dimension value with the arrows, thumbwheel , mouse wheel, or by typing in the dimension box.
How do you center a rectangle in Solidworks?
Click Center Rectangle from the Rectangle flyout tool or click on the Menu Bar as Tools>Sketch Entities>Center Rectangle. Click to place the center point of the rectangle in the Graphics area. Move the cursor in any direction and click to set the four edges of the rectangle. Click Ok.
How do I center in Solidworks?
In the PropertyManager, under Advanced Mates, click Profile Center . For Entities to Mate, select the edges or faces that you want to center-align. In the PropertyManager, you can optionally: Change the mate alignment by clicking Aligned or Anti-aligned .
How do I edit a title block in Solidworks?
To edit the title block, the sheet properties, or add or delete a sheet, right click anywhere on the sheet in the design space and select the desired option. To edit the title block, once Edit Sheet Format has been selected, the title block can be edited.
How do you create a configuration table in Solidworks?
To start a Modify Configurations table, right-click on any feature, dimension, mate or component and select the “Configure Feature”, “Configure Dimension” or “Configure Component” command.
Can we build a profile that consists of self intersecting curves?
We cannot build a profile that consists of self-intersecting curves. The procedure to create a copy of sketched 2d wireframe geometry is first select the Create 2d sketch command in the sketch toolbar. … We can create additional entities in 2d sketch without using them at all.
How do you save a custom weldment profile in Solidworks?
Click File > Save As. In the dialog box: In Save in, browse to install_dir lang language weldment profiles and select or create appropriate
How do you draw a weldment in Solidworks?
A 3D sketch can be started simply by clicking the 3D sketch button located on the weldments tab. Once the button is selected, click on the line command and choose a starting point in the drawing area, no starting plane is needed. Next to the cursor will be the letters XY, YZ, or XZ.
Why are my dimensions grey in SOLIDWORKS?
SolidWorks has many default colors for different types of dimensions. On drawings, the two main types of dimensions are inserted (driving) and non inserted (driven). … When this mode is turned on, the user gets their colors right for other lines, but dimensions appear as both black and grey.
How do you change the color of something in SOLIDWORKS?
Changing Paper Color Scroll down to Drawings > Paper Color and select it. Click edit to open the dialog box that lets you select the color. You can choose predefined colors, or create your own from the color plot and by entering the RGB information.
How do you cut a circle in half in SolidWorks?
Select trim tool and click on “trim to closest”. Than click on the left or right side of the circle (directly to the line) to get a half circle. Click on the green button on the top right to confirm trimming.
How do you split a 3d model in SolidWorks?
You can create separate part files, and form an assembly from the new parts. You can split one or more solid or surface bodies. To split a surface, the Trimming Surface must extend past the boundaries of the surface to split. Click Split (Features toolbar) or Insert > Features > Split.
