Contents
How do I move a line in SolidWorks?
To move: Click the line or text and drag to a new location. (Annotation toolbar), or click Insert > Annotations > Note. Specify the text properties, then click to place the text in the desired location.
How do you close a shape in SolidWorks?
Click Tools > Sketch Tools > Close Sketch to Model. An arrow points in the direction in which the sketch will close. (The extruded boss will either be within the sketch lines or outside of the sketch lines.) In the dialog box, select Reverse direction to close the sketch, if necessary.
How do you move a shape in SolidWorks?
To move, copy, rotate, or mate a solid or surface body: Click Move/Copy Bodies (Features toolbar) or Insert > Features > Move/Copy . Specify parameters to move, copy, or rotate bodies. Apply mates between bodies.
Why is part fixed in Solidworks assembly?
It is recommended that at least one assembly component is either fixed, or mated to the assembly planes or origin. This gives a frame of reference for all other mates, and helps prevent unexpected movement of components when mates are added. A fixed component has a (f) before its name in the FeatureManager design tree.
What is sketch entity solidworks?
Sketching Lines Centerlines. Use centerlines to create symmetrical sketch elements and revolved features, or as construction geometry. You can create multiple radial or diametric dimensions without selecting the centerline each time.
How should the warning shown here be repaired?
How should the warning shown here be repaired? Select a new face or plane to replace the missing one.
What is a Parasolid model?
Parasolid is a geometric modeling kernel originally developed by Shape Data Limited, now owned and developed by Siemens Digital Industries Software, which can be licensed by other companies for use in their 3D computer graphics software products.
How do you fix mesh in Solidworks?
The first step is to check to see if there are multiple bodies in the study. If so, apply a finer mesh control on each of the bodies that are failing. A finer mesh can often resolve mesh failures by decreasing the size of elements on small features or thin model geometry.
How do you mate a part to the origin?
Right click on the Part/Assembly and select Float. Click the arrow next to the Part/Assembly to display the Design Tree elements. Click on the Coordinate System, Ctrl+click on the Origin, and click Coincident Mate. Right click on the Part/Assembly and select Fix.
How do I center align in Solidworks?
After you sketch a centerline you can select it with the curve selection box. You can enter text in a box below the curve selection box. Your text will appear above the line. You can then select the center align option to center the text and click the green check to confirm the change.
How do you center a rectangle in Solidworks?
Click Center Rectangle from the Rectangle flyout tool or click on the Menu Bar as Tools>Sketch Entities>Center Rectangle. Click to place the center point of the rectangle in the Graphics area. Move the cursor in any direction and click to set the four edges of the rectangle. Click Ok.
Where is sketch entities in Solidworks?
In the PropertyManager, under Entities to Move or Entities to Copy: Select sketch entities for Sketch item or annotations.
How do you move a block in Solidworks?
You can drag-and-drop pre-made blocks from the Design Library. (Blocks toolbar) or Insert > Annotations > Block . The Insert Block PropertyManager appears. You can also drag a block from the Blocks folder in the FeatureManager design tree into the graphics area.
Why isn’t my sketch defined solidworks?
In this tech tip we’ll answer the common question: Why is my SOLIDWORKS Sketch Pattern Under Defined? The reason is because the sketch instances can rotate. You could previously Fully Define the instances by adding a Horizontal or Vertical relation on one of the construction lines tied to the instances.
How many entities can you choose to mate with an angle mate?
Click Mate (Assembly toolbar) or Insert > Mate. In the Mate PropertyManager, for Entities to Mate , select two entities in the graphics area or the flyout FeatureManager design tree. Under Standard Mates, click Angle and set the dimension.
